您当前的位置:首页 > 产品服务 > 举升机
我们提供的每一个产品都倾注了我们的热情,我们的严谨,我们的创新细节期待每一款产品都能得到您的认可
底板式双柱举升机举升机,双柱

Floor Plate Two Post Lift

SMD40TPF

性能特点:
◆底板式设计适合底层不高的汽车修理店或车间;
◆采用双缸、板式链条及钢丝绳平衡系统,举升机升降平稳;
◆液压动力单元配置节流装置,可随时调整下降速度;
◆手动双边解锁;
◆支臂采用非对称式设计,车门开得更大;
◆标配24V限位开关;
◆橡胶支撑垫采用螺旋式调整高度和分阶段式调整高度二种,随机选用;
◆标配车门防护胶垫,保护车门免受损伤;
◆标配安全护栏,保护脚趾;
◆经过115% 动态和150%静态测试;
◆有CE认证。

FEATURES:

◆Floor plate design is ideal choice for low ceiling shop
◆By two cylinder ,plate and wire rope chain balances system,lifting off and landing smooth.
◆Hydraulic power unit configuration throttling device, can always adjust the rate of decline. manual locked release from two sides.
◆24V limit switch. Asymmetric arm design,leaves more space for the cars.
◆Rubber support pad with spiral adjust the height and in stages adjust the height.
◆Rubber pad door-opening protection.
◆Feet -protection safety guardrails.
◆It has adopted 115% dynamic and 150% static loading capacity tested.
◆CE certificated.

MODEL NO.SMD40TPF
举升重量/Lifting Capacity                     3200kg/4000kg
举升高度/Lifting Height                        1900mm
最低高度/Minimum Height                  110mm
举升时间/Lifting Time                           40-45s/50s
总高/Overall Height                              2830mm
总宽/Overall Width                               3420mm
柱间宽/Width Between Columns       2820mm
电机功率/Motor Power                          2.2kw
电源要求/Power Supply                         220V/240/380V/415V
重量/weight                                              592kg/636kg
包装尺寸/Packing Size                           2900*530*770mm
\