您当前的位置:首页 > 产品服务 > 举升机
我们提供的每一个产品都倾注了我们的热情,我们的严谨,我们的创新细节期待每一款产品都能得到您的认可
龙门两柱举升机举升机,龙门

SMD40PRO/Two post lift

◆底板式设计适合底层不高的汽车修理店或车间;
◆采用双缸、板式链条及钢丝绳平衡系统,举升机升降平稳;
◆液压动力单元配置节流装置,可随时调整下降速度;
◆手动单边解锁,解锁省时更方便;
◆支臂采用三节设计,调节范围更大,适合不同的汽车底盘;
◆托盘采用三级螺旋伸缩设计,调节范围110-240mm;
◆标配24V限位开关;
◆标配车门防护胶块,保护车门免受损伤;
◆标配安全护栏及安全护罩,更显人性化的设计理念;
◆经过115% 动态和150%静态测试;
◆CE认证。

FEATURES:

◆Floor plate design is ideal choice for low ceiling shop
◆By two cylinder ,plate and wire rope chain balances system,lifting off and landing smooth.
◆Hydraulic power unit configuration throttling device, can always adjust the rate of decline.
◆Asymmetric column allows wider drive through clearance.
◆Manual lock release from one side,more convenient to use.
◆Take three stages arm design, a larger adjustment range, for different vehicle chassis.
◆With 24V limit switch. 
◆Rubber support pad with spiral adjust the height and in stages adjust the height, optional.
◆Rubber pad door-opening protection.
◆Have adopted 115% dynamic and 150% static loading tested.
◆CE approved


技术参数/TECHNICAL SPECIFICATION:
举升重量/Lifting capacity                          4.0T
举升高度/lifting height                             1900mm
最低宽度/Minimum width                         110mm
整机高度/Overall Height                           3766mm
整机宽度/Overall width                               3440mm
柱间宽/Width Between Columns            2800mm
举升时间/Lifting Time                               50s
电机功率/Motor power                               2.2kw
电源要求/Power supply                             380V/3PH or 220V/1PH
重量/Weight                                                 711kg
\